The live sawn cut on this material produces a beautiful mixed grain. The tannin content of the European Oak reacts beautifully to our custom staining process, yielding colors that simply are not possible to attain on American Oak.

Our Euro Oak line is typically produced using a sturdy ¾” thick engineered platform with an extra thick top layer of European White Oak, however it is available in other (thinner) formats as well.

This material, made 100% in the EU, is imported in its raw state to be stained and finished in our facilities here in the USA.

  • Finishing
    Surfaces & Finishes
    Euro Oak Floors come are finished in a low VOC water based polyurethane SURFACE TREATMENTS include:
    • Wire Brushing
    • Distressing - dings and dents, chattered edges
    • Hand Scrape
  • Dimensions & Formats
    Dimensions & Formats
    ENGINEERED WOOD
    • Standard plank thickness is 3/4",  5/8" thickness available by request
    • Standard plank width is 7” wide, additional widths available by request
    • Standard plank lengths are 2' - 10' long, additional lengths groupings available by request
    SOLID WOOD
    • Standard plank thickness is 3/4"
    • Standard plank width is 7” wide, additional widths available by request
    • Plank lengths are 2’ 10 long,additional lengths groupings available by request
  • Installation Methods
    Installation Methods
    Installation methods vary greatly depending on site conditions, but here are some general guidelines:
    • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
    • Engineered wood is most commonly glued down to concrete subfloors. An additional soundproofing or moisture blocking barrier is often included in this type of installation.
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.