Barn Wood White

Reclaimed Barn Woods White is supplied unfinished and requires a coat of clear, matte polyurethane after instal. The look here is not simulated, it is truly old barn paint on mixed softwoods, hence this material is recommended for use as walls more than flooring.

  • Surfaces & Finishes:

    Reclaimed floors are finished with either low VOC water based based polyurethane or natural oils.

    SURFACE / FACE TREATMENTS

    Reclaimed floors are made in 3 distinct faces:
    • ORIGINAL FACE / FLOP HOUSE The full patina of the original reclaimed wood including original saw marks remains on this face.
    • HIT OR MISS FACE Some areas of the board are sanded smooth while others are left with an original face.
    • MILLED FACE Nearly the entire board is sanded smooth, a trace of original face and saw marks may remain.

  • Dimensions & Formats:

    SOLID WOOD

    • Standard Thickness is 3/4″, custom thickness upon request
    • Board widths range from 3″ – 12″ widec wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer lengths available upon request

    ENGINEERED WOOD

    • Standard Thickness is 5/8″, 3/4" thickness available upon request
    • Board widths range from 3″ – 12″ wide, wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer length groupings available upon request

  • Installation Methods:

    Installation methods vary greatly depending on site conditions, but here are some general guidelines:

    • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
    • Engineered wood is most commonly glued down to concrete subfloors. An additional soundproofing or moisture blocking barrier is often included in this type of installation.
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.