Bespoke Hickory Kensignton

Warm rich color on American Hickory with a heavy hand scrape and a glossy finish to it.

  • Surfaces & Finishes:

    Bespoke floors are finished with low VOC water based based polyurethane.

    SURFACE TREATMENTS include but are not limited to:

    • Hand Scraping – *true* hand scraping
    • Distressing – dings &amp dents
    • Nail Holes – authentic and / or simulated
    • Saw Marks – radial and / or linear
    • Torching – exactly what it sounds like
    • Wire Brushing – adds grain texture
    • Metal Top Nails – non structural metal top nails at ends of planks
    • Pegs – non structural wooden pegs at ends of planks

  • Dimensions & Formats:

    SOLID WOOD

    • StandardThickness is 3/4″. Custom thickness upon request
    • Board widths range from 3″ – 12″ wide. Wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths. Longer lengths available upon request

    ENGINEERED WOOD

    • Standard Thickness is 3/4″ or 5/8”, custom thickness upon request
    • Board widths range from 3″ – 12″ wide, wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer length groupings available upon request
    • 5/8″ thick engineered planks have a 4.5 mm hardwood top layer
    • 3/4″ thick engineered planks are available with either a 4mm or 6.5mm hardwood top layer

  • Installation Methods:

    Installation methods vary greatly depending on site conditions, but here are some general guidelines:

    • SOLID WOOD is typically nailed, or nailed and glued, to a plywood subfloor.
    • Engineered wood is most commonly glued down to concrete subfloors. An additional soundproofing or moisture blocking barrier is often included in this type of installation.
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.