Euro Oak Bearpen

• Surfaces & Finishes

  Our Euro Oak floors are finished with low VOC water-based polyurethane in 2 gloss levels - matte or satin - depending on the color/style. 

• Dimensions & Formats

  Euro Oak Bearpen is available in the following formats:

  ENGINEERED WOOD

  • 5/8" or 3/4" Thick
    • 5/8" has a 4mm Euro Oak top layer, 3/4" has a 6mm Euro Oak top layer
  • 5", 7", 8 5/8", 10 1/4", and 12" Plank Widths
    • Wider planks available upon request
  • Standard plank lengths are 2′–10′ with ~50% being full length at 10', and 75% of the entire mix being ~ 6' - 10'
    • Longer lengths & fixed lengths available upon request
  • Herringbone is available in a standard size of 4" x 24" 
    • Custom herringbone sizes available upon request

  Plank & pattern OPTIONS

  • Single-width planks
  • Mixed-width planks 
  • Chevron
  • Herringbone
  • Parquet patterns
  • Custom patterns/designs upon request
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
  • ​Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such as a sound abating mat or a moisture barrier, depending on site conditions / requirements.
  • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.