Euro Oak Millbrook

• Surfaces & Finishes

  Euro Oak Millbrook has a smooth surface texture and is finished with a matte, UV Cured, low VOC, water-based finish. Millbrook is also availbe in a brushed surface texture.

• Dimensions & Formats

  Euro Oak Millbrook standard format is engineered 5/8" thick x 7" wide and is also available in the formats and widths listed below:

  ENGINEERED WOOD

  • Standard thickness 5/8" or 3/4"
  • 5/8" thickness has a 4mm Euro Oak top layer
  • 3/4" thickness has a 6mm Euro Oak top layer
  • Availble in plank widths of 5", 7", 8 5/8", 10 1/4", and 12"
    Wider planks available upon request
  • Standard plank lengths are 2′–10′ with ~50% being full length at 10', and 75% of the entire mix being ~6'-10'. 
    Longer lengths & fixed lengths available upon request
  • Herringbone is available in a standard size is 4" x 24" 
    Custom herringbone sizes available upon request

  Plank & pattern OPTIONS

  • Single-width planks
  • Mixed-width planks 
  • Chevron
  • Herringbone
  • Parquet patterns
  • Custom patterns/designs upon request
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

  • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
  • ​Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such a sound abating mat or a moisture barrier, depending on site conditions/requirements. 
  • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.