Euro Oak Panther
European Oak
Character Grade (Available in Light Character & Select Grade)
Brushed Surface Texture
Matte UV Oil (Low-to-no VOC)
-
Surfaces & Finishes
Euro Oak Panther features a light brushed surface texture and is finished with a UV (ultra-violet) cured natural oil finish.
-
Dimensions & Formats
Euro Oak Panther is availabe in the following formats:
ENGINEERED WOOD
- 5/8" or 3/4" Thick
- 5/8" has a 4mm Euro Oak top layer, 3/4" has a 6mm Euro Oak top layer
- 5", 7", 8 5/8", 10 1/4", and 12" Plank Widths
- Wider planks available upon request
- Standard plank lenghts are 2' - 10' with ~ 50% being full length at 10', and 75% of the entire mix being ~ 6' - 10'
- Longer lengths & fixed lengths available upon request
- Herringbone is available in a standard size of 4" x 24"
- Custom herringbone sizes available upon request
Plank & pattern OPTIONS
- Single-width planks
- Mixed-width planks
- Chevron
- Herringbone
- Parquet patterns
- Custom patterns/designs upon request
- 5/8" or 3/4" Thick
-
Installation Methods
Installation methods vary depending on wood format and site conditions, but here are some general guidelines:
- Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
- Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such as a sound abating mat or a moisture barrier, depending on site conditions & requirements.
- Engineered floors are also usually the best choice for gluing down over radiant heat installations.
- In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.