Heritage Hickory

LV Wood Heritage showcases the simple beauty of North American hardwoods in their natural state. Hickory is shown here with a matte natural finish with all of its natural variation and character exposed for all to see.

  • Surfaces & Finishes:

    Heritage floors are finished with low VOC water based based polyurethane.

    SURFACE TREATMENTS include:

    • Sanded smooth

  • Dimensions & Formats:

    SOLID WOOD

    • Standard Thickness is 3/4″, custom thickness upon request
    • Board widths range from 3″ – 12″ wide,w ider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer lengths available upon request

    ENGINEERED WOOD

    • Standard Thickness is 3/4″ or 5/8”, custom thickness upon request
    • Board widths range from 3″ – 12″ wide, wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer length groupings available upon request
    • 3/4″ thick engineered planks have a 6mm hardwood top layer
    • 5/8″ thick engineered planks have a 4.5 mm hardwood top layer

  • Installation Methods:

    Installation methods vary greatly depending on site conditions, but here are some general guidelines:

    • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
    • Engineered wood is most commonly glued down to concrete subfloors. An additional soundproofing or moisture blocking barrier is often included in this type of installation.
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.