Heritage White Oak Chevron

• Surfaces & Finishes

  Our Heritage floors are finished with either a low VOC water-based polyurethane in 2 gloss levels - matte or satin - or an all natural VOC free flax-based oil.

• Dimensions & Formats

  solid wood

  • Standard thickness is 3/4"
  • Custom thickness upon request
  • Standard plank widths range from 3" - 12" wide
  • Wider boards available upon request
  • Standard plank lengths are 2' - 10' random lengths
  • Longer lengths & length groupings available upon request

  engineered wood​

  • Standard thickness 3/4"
  • Custom thickness upon request
  • Standard plank widths range from 3" - 12" wide
  • Wider boards available upon request
  • Standard plank lengths are 2' - 10' random lengths
  • Longer lengths & length groupings available upon request
  • 5/8" thick engineered material has a 4 mm hardwood top layer
  • 3/4" thick engineered material is available either 4 mm or 6 mm hardwood top layer

  plank & pattern options

  • Single-width planks
  • Mixed-width planks
  • Chevron
  • Herringbone
  • Parquetry patterns
  • Custom patterns / designs
• Installation Methods

  Installation methods vary depending on wood format and site conditions, but here are some general guidelines: 

  • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
  • Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such as a sound abating mat or a moisture barrier, depending on side conditions / requirements.
  • Engineered floors are also usually the best choice fr gluing down over radiant heat installations. 
  • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.