Reclaimed Fence Post Oak Montauk

FPO materials are salvaged from traditional equestrian farms in and around Virginia and Kentucky. Here, in the Montauk color, this noble Oak is given a fresh light feeling. Milled face, sanded smooth, satin.

  • Surfaces & Finishes:

    Reclaimed floors are finished with either low VOC water based based polyurethane or natural oils.

    SURFACE / FACE TREATMENTS

    Reclaimed floors are made in 3 distinct faces:
    • ORIGINAL FACE / FLOP HOUSE The full patina of the original reclaimed wood including original saw marks remains on this face.
    • HIT OR MISS FACE Some areas of the board are sanded smooth while others are left with an original face.
    • MILLED FACE Nearly the entire board is sanded smooth, a trace of original face and saw marks may remain.

  • Dimensions & Formats:

    SOLID WOOD

    • Standard Thickness is 3/4″, custom thickness upon request
    • Board widths range from 3″ – 12″ widec wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer lengths available upon request

    ENGINEERED WOOD

    • Standard Thickness is 5/8″, 3/4" thickness available upon request
    • Board widths range from 3″ – 12″ wide, wider boards available upon request
    • Board lengths are 2′ – 10′ random lengths, longer length groupings available upon request

  • Installation Methods:

    Installation methods vary greatly depending on site conditions, but here are some general guidelines:

    • Solid wood is typically nailed, or nailed and glued, to a plywood subfloor.
    • Engineered wood is most commonly glued down to concrete subfloors. An additional soundproofing or moisture blocking barrier is often included in this type of installation.
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.