Patina Studio Bitterroot
Light Character Grade
Light Brushed Surface
Matte Low VOC Waterbase Poly
Surfaces & Finishes
All materials in the Patina Studio line are hand-finished with an extra-matte, low VOC, water-based polyurethane, applied over a lightly brushed European Oak.
Dimensions & Formats
Patina Studio materials are available in a 5/8" thick engineered format with a 4mm top layer. The standard width is 7" and lengths range from 2-10', consisting of primarily longer lengths. Custom widths, herringbone, and chevron are available upon request.
PLANK & PATTERN OPTIONS
- Single-width planks
Installation methods vary depending on wood format and site conditions, but here are some general guidelines:
- Engineered wood is typically glued to concrete or plywood subfloors, with or without an underlayment such as a sound abating mat or a moisture barrier, depending on site conditions/requirements.
- If the plank is particularly wide, gluing and nailing is always good practice if possible.
- Engineered floors are typically the best choice for gluing down over radiant heat installations.
- Always follow the appropriate NWFA (National Wood Flooring Association) protocols for the installation of any LV Wood material.