Images: 90° 45° Full

Stile Nevada

European Oak

Character Grade

Brushed Surface Texture

BONA Matte Low VOC Waterbase Poly

  • Surfaces & Finishes

    All Stile floors are finished with Bona low VOC water-based polyurethanes. All Stile stock materials are finished in matte. Various gloss levels are available via custom order from Italy.

    Stile stock materials have either a smooth, light brushed, or brushed surface, as noted above for each material. Additional surface textures are available via custom order from Italy.

  • Dimensions & Formats

    ENGINEERED WOOD

    • Standard thickness is 5/8"
      Additional thicknesses available upon request
    • Standard plank width is 7" wide
      Additional widths are available for most Stile specs, ranging from 2.75″ (70mm) – 12″ (300mm) 
    • Standard plank lengths are 5′ – 8′ random lengths
      Longer lengths & length groupings available upon request
    • 5/8″ thick engineered material has a 4 mm hardwood top layer
    • 3/4″ thick engineered material is available with either a 4mm or 6mm hardwood top layer

    Plank & pattern OPTIONS

    • Single-width planks
    • Mixed-width planks 
    • Chevron
    • Herringbone
    • Parquetry patterns
    • Custom patterns/designs
  • Installation Methods

    Installation methods vary depending on wood format and site conditions, but here are some general guidelines:

    • Engineered wood is typically glued down to concrete or plywood subfloors, with or without an underlayment such a sound abating mat or a moisture barrier, depending on site conditions/requirements. 
    • Engineered floors are also usually the best choice for gluing down over radiant heat installations.
    • In either format, when planks are particularly wide, gluing and nailing is always good practice if possible.